1.0.1 This standard specifies the main design contents andtechnical requirements for powerhouses of hydropower stations.1.0.2 This standard is applicable to the design of construction,extension and renovation of Grade 1, Grade 2, Grade 3 powerhousesfor hy...[繼續閱讀]

    2.0.1 Water retaining powerhouseThe powerhouse located in a natural or artificial excavated channelwith water retaining effect, which directly bears theupstream water pressure.2.0.2 Powerhouse at dam-toeThe powerhouse located near the downstream of dam to...[繼續閱讀]

    3.1.1 The layout of powerhouses shall be determined throughtechnical and economic demonstration based on river developmentplan, topography and geology as well as environmental conditions.(1) Under the prerequisite of ensuring the safety operation andconve...[繼續閱讀]

    3.2.1 The size and space of each part of the powerhouse andauxiliary plant shall be determined reasonably according to the scaleof hydropower stations, powerhouse type, layout requirements ofelectrical and mechanical equipment, environmental characteristi...[繼續閱讀]

    4.1.1 Probability limit state design principles with partial factordesign format is adopted in this standard.4.1.2 The calculation and checking for design of powerhousestructures shall be carried out based on the ultimate limit state andserviceability lim...[繼續閱讀]

    4.2.1 Permanent action (load), variable action (load), accidentalaction(load) shall be considered in structure.4.2.2 Different representative values of a load shall be adoptedcorresponding to different action (load) in structure design.Characteristic valu...[繼續閱讀]

    4.3.1 The following design of limit state expression shall beadopted under fundamental combination, see Equation (4.3.1) :Where:S() =function of action effect.R() =function of structural resistance.γ0 =importance factor of structure, taken according to th...[繼續閱讀]

    The following expression of limit state shall be adopted forcalculation of serviceability limit state for structure, see Equation(4.4.1):Where:Sk()=Function of characteristic combination value of actioneffects of serviceability limit state, calculated byc...[繼續閱讀]

    5.1.1 Calculation and checking of integral stability and foundationstress of powerhouse shall include the following contents.(1) Calculation of stability against sliding along the foundationsurface. Calculation of sliding stability in deep layer along the...[繼續閱讀]

    5.2.1 Calculation of Integral stability against sliding of powerhouseshall comply with the following provisions.(1) Shear-rupture strength is calculated by Equation (5.2.1-1):Where:γ0＝Importance factor of structure, taking 1.1 for the powerhouseof structu...[繼續閱讀]